Brushed DC Motor: 130-Size; 6V; 11.5kRPM; 800mA Stall
This is the 130-size DC motor used in the larger Pololu plastic
gearmotors (228:1 offset, 120:1 offset, 200:1 90-degree, and 120:1 90-degree). It has a recommended
operating voltage of 3 – 12V; at 6V, the no-load speed is
about 11,500RPM, the no-load current is approximately 70mA, and the stall current is around
800mA. For an estimate of the torque, note that the Pololu 228:1 plastic gearmotor produces
roughly 100oz-in of torque at 6V using this motor, and the Pololu 120:1
plastic gearmotors produce roughly 75oz-in of torque at 6V. The output shaft has a diameter of 2mm.
מידות
| Size: | 25 x 15 x 20 mm |
|---|---|
| Weight: | 18 g |
| Shaft diameter: | 2 mm |
מאפיינים כלליים
| Free-run speed @ 6V: | 11500 rpm |
|---|---|
| Free-run current @ 6V: | 70 mA |
| Stall current @ 6V: | 800 mA |