סל הקניות
0 פריטים
 
             קטגוריות
 

Pololu 12V Step-Up Voltage Regulator U3V50F12

Pololu 12V Step-Up Voltage Regulator U3V50F12
לחץ להגדיל
מחיר ₪145
זמינות המוצר לברר בחנות
דגם 2568
יצרנים pololu
דירוג ממוצע ללא דירוג

Share |


כמות הוסף לסל

Pololu 12V Step-Up Voltage Regulator U3V50F12

These boost (step-up) voltage regulators generate higher output voltages from input voltages as low as 2.9 V. They are switching regulators (also called switched-mode power supplies (SMPS) or DC-to-DC converters) and have a typical efficiency between 80% to 95%. The available output current is a function of the input voltage, output voltage, and efficiency (see the Typical Efficiency and Output Current section below), but the input current can typically be as high as 5 A. This regulator is available with a fixed 5 V, 6 V, 9 V, 12 V, or 24 V output:


The U3V50x regulator family also includes two adjustable-output versions: the U3V50ALV offers an output range of 4 V to 12 V and the U3V50AHV offers an output range of 9 V to 30 V. The different versions of the board all look very similar, so the bottom silkscreen includes a blank space where you can add your own distinguishing marks or labels.

The no-load quiescent current will typically be between 1 mA and 5 mA for most combinations of input and output voltages, though the combination of a very high output voltage and a very low input voltage (e.g. when boosting from 3 V in to 30 V out) can result in quiescent currents on the order of a few dozen milliamps. The ENABLE pin can be used to put the board in a low-power state that reduces the quiescent current to approximately 20 µA per volt on VIN.

This regulator has built-in reverse-voltage protection, over-current protection, thermal shutdown (which typically activates at 165°C), and an under-voltage lockout that causes the regulator to turn off when the input voltage is below 2.5 V (typical).

 

Features

  • Input voltage: 2.9 V to VOUT
  • Fixed 5 V, 6 V, 9 V, 12 V or 24 V output with 4% accuracy
  • 5 A switch allows for input currents up to 5 A
  • Integrated reverse-voltage protection, over-current protection, over-temperature shutoff, and under-voltage lockout
  • Typical efficiency of 80% to 95%, depending on input voltage, output voltage, and load
  • Compact size: 1.9″ × 0.6″ × 0.41″ (48 × 15 × 10.5 mm)
  • Two mounting holes for #2 or M2 screws
  • Smaller holes for 0.1″ header pins and larger holes for terminal blocks offer several options for connecting to the board

Dimensions

Size: 0.6″ × 1.9″ × 0.41″1
Weight: 7.5 g2

General specifications

 

Minimum operating voltage: 2.9 V
Maximum operating voltage: 12 V
Maximum input current: 5 A
Output voltage: 12 V
Reverse voltage protection?: Y
Maximum quiescent current: 8 mA3

 

כתוב בקורת
שם פרטי


ביקורת : הערה ללא תרגום מ HTML!

דירוג רע            טוב

הכנס את הקוד התיבה

Pololu 12V Step-Up Voltage Regulator U3V50F12
לחץ להגדיל
Pololu 12V Step-Up Voltage Regulator U3V50F12
לחץ להגדיל
Pololu 12V Step-Up Voltage Regulator U3V50F12
לחץ להגדיל
Pololu 12V Step-Up Voltage Regulator U3V50F12
לחץ להגדיל