סל הקניות
0 פריטים
 
             קטגוריות
 

SparkFun Qwiic Shield for Teensy

SparkFun Qwiic Shield for Teensy
לחץ להגדיל
מחיר ₪20
זמינות המוצר לברר בחנות
דגם DEV-17119
דירוג ממוצע ללא דירוג

Share |


כמות הוסף לסל

SparkFun Qwiic Shield for Teensy

 

The SparkFun Qwiic Shield for Teensy provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Teensy boards. This shield is sized to work with the footprint of Teensy 4.0, Teensy 3.2, and Teensy LC. This shield connects the I2C bus (GND, 3.3V, SDA, and SCL) on your Teensy to four SparkFun Qwiic connectors (two horizontally and two vertically mounted). The Qwiic ecosystem allows for easy daisy chaining so, as long as your devices are on different addresses, you can connect as many Qwiic devices as you'd like.

We have also added a "PROG" button on this shield that is electrically parallel with the "PROG" button on the Teensy Boards so you can choose to enter Programming mode using either the button on your Teensy or the button on the shield.

The Qwiic Shield for Teensy comes with the Teensy Header Kit and you will need to solder the headers to the shield and, if necessary, to your Teensy board. Take care to match the markings on the Qwiic Shield to the appropriate pins on your Teensy to avoid possibly damaging your boards.

 

 

 

 

  • Teensy 4.0, 3.2, or LC Footprint Compatible
  • 4x Qwiic Connection Ports
  • "PROG" Button w/ satisfying tactile feedback
  • I2C Jumper
  • 3.3V and GND Buses
כתוב בקורת
שם פרטי


ביקורת : הערה ללא תרגום מ HTML!

דירוג רע            טוב

הכנס את הקוד התיבה

SparkFun Qwiic Shield for Teensy
לחץ להגדיל
SparkFun Qwiic Shield for Teensy
לחץ להגדיל
SparkFun Qwiic Shield for Teensy
לחץ להגדיל