Stepper Motor: Bipolar, 200 Steps/Rev, 42×11.6mm, 3.5V, 1 A/Phase
Stepper Motor: Bipolar, 200 Steps/Rev, 42×11.6mm, 3.5V, 1 A/Phase
This pancake bipolar stepping motor from Sanyo has a 1.8° step angle (200 steps/revolution).
It offers a holding torque of 850 g-cm (12 oz-in), and each phase draws
1 A at 3.5 V. This stepper motor’s flat profile (18.6 mm including the shaft)
allows it to be used in places where more traditional stepper motors would be too bulky.
This pancake bipolar stepping motor from Sanyo has a 1.8° step angle
(200 steps/revolution) and a holding torque of 850 g-cm (12 oz-in).
Each phase draws 1 A at 3.5 V. The motor has four color-coded wires
terminated with bare leads: red and yellow connect to one coil; orange and blue connect to the other.
It can be controlled by a pair of suitable H-bridges (one for each coil),
but we recommend using a bipolar stepper motor driver. For more information, see the datasheet (385k pdf).
Our 5mm universal mounting hub can be used to mount objects on the stepper motor’s 5mm-diameter output shaft.
מפרט טכני
- Size: 42 mm square × 11.6 mm, not including the shaft
- Weight: 70 g (2.5 oz)
- Shaft diameter: 5 mm
- Steps per revolution: 200
- Current rating: 1 A per coil
- Voltage rating: 3.5 V
- Resistance: 3.5 Ohm per coil
- Holding torque: 850 g-cm (12 oz-in)
- Inductance: 1.2 mH per coil
- Lead length: 12 in
מידות
Size: | 42 mm square × 11.6 mm1 |
---|---|
Weight: | 70 g |
Shaft diameter: | 5 mm |
מאפיינים כלליים
Steps per revolution: | 200 |
---|---|
Current rating: | 1000 mA2 |
Voltage rating: | 3.5 V |
Holding torque: | 11.8 oz·in |
Resistance: | 3.5 Ohm2 |
Inductance per phase: | 1.2 mH |
Number of leads: | 4 |
Lead length: | 11 in |
ביקורת : הערה ללא תרגום מ HTML!
דירוג רע טוב
הכנס את הקוד התיבה