19:1 Metal Gearmotor 37Dx52L mm

This 2.05" × 1.45" × 1.45"gearmotor is a powerful brushed DC motor with 18.75:1 metal gearbox intended for operation at 12 V.
These units have a 0.61"-long, 6 mm-diameter D-shaped output shaft. This gearmotor is also available with an integrated encoder.

Key specs at 12 V: 500 RPM and 300 mA free-run, 84 oz-in (5 kg-cm) and 5 A stall.
 

10×10×12

Gearmotor Dimensions

The face plate has six mounting holes evenly spaced around the outer edge threaded for M3 screws. These mounting holes form a regular hexagon and the centers of neighboring holes are 15.5 mm apart. You can use our custom 37D metal gearmotor bracket (shown in the left picture below) to mount the gearmotor to your project via these mounting holes and the screws that come with the bracket.
 

Exact gear ratio: 25×30×3010×10×12=18.75:1

Dimensions

General specifications