67:1 Metal Gearmotor 37Dx57L mm

This 2.13" x 1.45" x 1.45" gearmotor is a powerful brushed DC motor
with 67:1 metal gearbox intended for operation at 12 V.
These units have a 0.61"-long, 6 mm-diameter D-shaped output shaft.
This gearmotor is also available with an integrated encoder.

Key specs at 12 V: 150 RPM and 300 mA free-run, 200 oz-in (14 kg-cm) and 5 A stall.
 

The face plate has six mounting holes evenly spaced around the outer edge threaded for M3 screws.
These mounting holes form a regular hexagon and the centers of neighboring holes are 15.5 mm apart.
You can use our custom 37D metal gearmotor bracket (shown in the left picture below)
to mount the gearmotor to your project via these mounting holes and the screws that come with the bracket.
 

Please note that unlike our smaller metal gearmotors, these 37D mm gearmotors have output shafts with a diameter of 6 mm.
The Pololu universal aluminum mounting hub for 6mm shafts can be used to mount our larger
Pololu wheels (80mm- and 90mm-diameter) or custom wheels
and mechanisms to the gearmotor’s output shaft (see the right picture above).

The picture below shows the dimensions (in mm) of the 37D mm line of gearmotors.
The value of X is 22 mm for the 19:1 37Dx52L mm and 29:1 37Dx52L mm versions,
24 mm for the 50:1 37Dx54L mm and 67:1 37Dx54L mm versions,
and 26.5 mm for the 100:1 37Dx57L mm and 131:1 37Dx57L mm versions.

מידות

מאפיינים כלליים