50:1 Metal Gearmotor 37Dx54L mm
50:1 Metal Gearmotor 37Dx54L mm
This 2.13" x 1.45" x 1.45" gearmotor is a powerful brushed DC motor with 50:1 metal gearbox intended for operation at 12 V.
These units have a 0.61"-long, 6 mm-diameter D-shaped output shaft.
This gearmotor is also available with an integrated encoder.
Key specs at 12 V: 200 RPM and 300 mA free-run, 170 oz-in (12 kg-cm) and 5 A stall.
These motors are intended for use at 12 V, though the motor can begin rotating at voltages as low as 1 V.
The face plate has six mounting holes evenly spaced around the outer edge threaded for M3 screws.
These mounting holes form a regular hexagon and the centers of neighboring holes are 15.5 mm apart.
You can use our custom 37D metal gearmotor bracket
(shown in the left picture below)
to mount the gearmotor to your project via these mounting holes and the screws that come with the bracket.
מידות
Size: | 37D x 54L mm |
---|---|
Weight: | 6.9 oz |
Shaft diameter: | 6 mm |
מאפיינים כלליים
Gear ratio: | 50:1 |
---|---|
Free-run speed @ 6V: | 100 rpm1 |
Free-run current @ 6V: | 250 mA1 |
Stall current @ 6V: | 2500 mA1 |
Stall torque @ 6V: | 85 oz·in1 |
Free-run speed @ 12V: | 200 rpm |
Free-run current @ 12V: | 300 mA |
Stall current @ 12V: | 5000 mA |
Stall torque @ 12V: | 170 oz·in |
ביקורת : הערה ללא תרגום מ HTML!
דירוג רע טוב
הכנס את הקוד התיבה