סל הקניות
0 פריטים
 
             קטגוריות
 

Serial Enabled LCD Backpack

Serial Enabled LCD Backpack
לחץ להגדיל
מחיר ₪62
זמינות המוצר במלאי
דגם LCD-00258
יצרנים sparkfun
דירוג ממוצע ללא דירוג

Share |


כמות הוסף לסל

Serial Enabled LCD Backpack

The serial enabled LCD backpack allows you to control a parallel based LCD over a single-wire serial interface.
The SerLCD backpack takes care of all the HD44780 commands allowing
seamless integration with any micro that can communicate over a wide range of TTL serial baud rates.
The SerLCD currently supports 16 and 20 character wide screens with 2 or 4 lines of display.

Communication with SerLCD requires 5V TTL serial at a default baud rate of 9600bps (8-N-1).
You can adjust the baud to any standard rate between 2400 and 38400bps.
The power, ground and RX pins are all broken out to a 3.5mm pitch screw terminal.

SerLCD has the ability to dim the backlight to conserve power if needed.
There is also a potentiometer on the backpack to adjust the contrast.

Note: The datasheet incorrectly identifies the PIC as a 16F688, when it's actually a 16LF88.
Sorry for blowing your mind.
 

 

 

מאפיינים:

  • PIC 16LF88 utilizes onboard UART for greater communication accuracy
  • Adjustable baud rates of 2400, 4800, 9600 (default), 14400, 19200 and 38400
  • Operational Backspace
  • Greater processing speed at 10MHz
  • Incoming buffer stores up to 80 characters
  • Backlight transistor can handle up to 1A
  • Pulse width modulation of backlight allows direct control of backlight brightness and current consumption
  • All surface mount design allows a backpack that is half the size of the original
  • Faster boot-up time
  • Boot-up display can be turned on/off  via firmware
  • User definable splash screen

תיעוד:

מידות:
0.56" x 1.75"

כתוב בקורת
שם פרטי


ביקורת : הערה ללא תרגום מ HTML!

דירוג רע            טוב

הכנס את הקוד התיבה

אין תמונות נוספות למוצר זה