סל הקניות
0 פריטים
 
             קטגוריות
 

Ultrasonic Range Finder - Maxbotix LV-WR1

Ultrasonic Range Finder - Maxbotix LV-WR1
לחץ להגדיל
מחיר ₪620
זמינות המוצר במלאי
דגם SEN-09009
יצרנים sparkfun
דירוג ממוצע ללא דירוג

Share |


כמות הוסף לסל

Ultrasonic Range Finder - Maxbotix LV-WR1

This is the new, weather resistant, field-hardened WR1 from Maxbotix. |
The WR1 uses a robust PVC housing, is designed to meet IP67 water intrusion, and matches standard electrical 3/4" PVC pipe fittings.
We are extremely pleased with the size, quality, and ease of use of this low voltage weather-resistant range finder.
The serial interface is a bit odd (it's RS232 instead of standard TTL),
but the PWM and Analog interfaces will allow any micro to listen easily enough.
The sensor provides very accurate readings of 0 to 254 inches (0 to 6.45m) in 1 inch increments with little or no dead zone!

Maxbotix is offering the EZ0, EZ1, EZ2, EZ3, and EZ4 with progressively narrower beam angles allowing the sensor to match the application.
Please see beam width explanation below.

Control up to 10 sensors with only two pins! Checkout the Maxbotix FAQ listed below.

Detailed dimensional is found in the datasheet below.

Mounting hardware is found here.

 

 


מאפיינים:

  • 42kHz Ultrasonic sensor
  • Operates from 3-5.5V
  • Low 2.1mA supply current
  • 20Hz reading rate
  • RS232 Serial Output - 9600bps
  • Analog Output - (Vcc/512)/inch
  • PWM Output - 147uS/inch
  • Designed for outdoor applications


תיעוד:

<span style="font-weight:" bold;"="">

כתוב בקורת
שם פרטי


ביקורת : הערה ללא תרגום מ HTML!

דירוג רע            טוב

הכנס את הקוד התיבה

Ultrasonic Range Finder - Maxbotix LV-WR1
לחץ להגדיל
Ultrasonic Range Finder - Maxbotix LV-WR1
לחץ להגדיל
Ultrasonic Range Finder - Maxbotix LV-WR1
לחץ להגדיל
Ultrasonic Range Finder - Maxbotix LV-WR1
לחץ להגדיל