Pololu Simple High-Power Motor Controller 24v12
Pololu Simple High-Power Motor Controller 24v12
The Pololu Simple Motor Controllers are versatile, general-purpose motor controllers for brushed,
DC motors.
A wide operating range of up to 5.5–40V and the ability to deliver up to several hundred
Watts in a small form factor make these controllers suitable for many motor control applications.
With a variety of supported interfaces—USB for direct connection to a computer,
TTL serial for use with embedded systems, RC hobby servo pulses for use as an
RC-controlled electronic speed control (ESC), and analog voltages for use
with a potentiometer or analog joystick—and a wide array of configurable settings,
these motor controllers make it easy to add basic control of brushed DC
motors to a variety of projects. Although this motor controller has many more
features than competing products, a free configuration utility (for Windows 7, Vista, Windows XP, and Linux)
simplifies initial setup of the device and allows for in-system testing and monitoring of the controller via USB.
For 24 V applications, we recommend the 24v12 or 24v23 versions.
We strongly recommend against using the 18v7, 18v15, or 18v25 with 24 V
batteries, which can significantly exceed 24 V when fully charged and are dangerously
close to the maximum voltage limits of these lower-voltage controllers.
Key Features
- Simple bidirectional control of one DC brush motor.
- 5.5 V to 30 V (18v7, 18v15, and 18v25) or 40 V (24v12 and 24v23) operating supply range.
- 7 A to 25 A maximum continuous current output without a heat sink, depending on controller model
-
Four communication or control options:
- USB interface for direct connection to a PC.
- Logic-level (TTL) serial interface for direct connection to microcontrollers or other embedded controllers.
- Hobby radio control (RC) pulse width interface for direct connection to an RC receiver or RC servo controller.
- 0–3.3 V analog voltage interface for direct connection to potentiometers and analog joysticks.
-
Simple configuration and calibration over USB with free configuration program (Windows 7, Vista, Windows XP, and Linux compatible).
מידות
Size: | 2.1" x 1.1" x 0.2" |
---|---|
Weight: | 7 g1 |
מאפיינים כלליים
Motor channels: | 1 |
---|---|
Control interface: |
USB; non-inverted TTL serial; RC servo pulses; analog voltage2 |
Minimum operating voltage: | 5.5 V |
Maximum operating voltage: | 40 V |
Continuous output current per channel: | 12 A3 |
Maximum PWM frequency: | 21.77 kHz |
Maximum logic voltage: | 3.3 V4 |
Reverse voltage protection?: | N |
Partial kit?: | Y |
ביקורת : הערה ללא תרגום מ HTML!
דירוג רע טוב
הכנס את הקוד התיבה