סל הקניות
0 פריטים
 
             קטגוריות
 

3.3V Step-Up/Step-Down Voltage Regulator S9V11F3S5

3.3V Step-Up/Step-Down Voltage Regulator S9V11F3S5
לחץ להגדיל
מחיר ₪65
זמינות המוצר לברר בחנות
דגם 2872
יצרנים pololu
דירוג ממוצע ללא דירוג

Share |


כמות הוסף לסל

3.3V Step-Up/Step-Down Voltage Regulator S9V11F3S5

 

The S9V11F3S5 switching step-up/step-down regulator efficiently produces a fixed 3.3 V (default) or 5 V (selectable) output whether it is higher or lower than the input voltage, which can range from 2 V to 16 V. (Note: minimum start-up voltage is 3 V, but it operates to 2 V after that.) The compact (0.5″ × 0.6″) module can supply a typical output current of up to 1.5 A when the input voltage is close to the output voltage.

 

The S9V11x family of efficient switching regulators (also called switched-mode power supplies (SMPS) or DC-to-DC converters) use a buck-boost topology to convert both higher and lower input voltages to a regulated output voltage. They take input voltages from 2 V to 16 V and increase or decrease them as necessary, offering a typical efficiency of over 85% and a typical output current of up to 1.5 A. The flexibility in input voltage offered by this family of regulators is especially well-suited for battery-powered applications in which the battery voltage begins above the regulated voltage and drops below as the battery discharges. Without the typical restriction on the battery voltage staying above the required voltage throughout its life, new battery packs and form factors can be considered.

The different members of this family offer different output voltage options, from fixed voltages with selectable alternatives to adjustable voltages that can be set anywhere between 2.5 V and 9 V using a precision 12-turn potentiometer. Some versions also have an adjustable low-voltage cutoff that can be set anywhere in the 2 V to 16 V output voltage range and used to prevent your battery from over-discharging. This is particularly useful for battery chemistries that can be damaged when over-discharged, including Li-ion and LiPo

 

Features

  • Input voltage: 2 V to 16 V (note: this regulator requires 3 V to start, but it can operate down to 2 V after startup)
  • Fixed 3.3 V output with +5/-3% accuracy (can be changed to 5 V using the SEL pin)
  • Typical maximum continuous output current: 1.5 A (when input voltage is close to the output; the Typical efficiency and output current section below shows how the achievable continuous output current depends on the input and output voltages)
  • Power-good indicator can be used to tell when the regulator has reached and is maintaining its target output voltage
  • Power-saving feature maintains high efficiency at low currents (quiescent current is less than 1 mA while enabled and approximately 7 µA per volt on VIN when regulator is disabled)
  • Integrated over-temperature and short-circuit protection
  • Small size: 0.5″ × 0.6″ × 0.17″ (12.7 × 15.3 × 4.3 mm)

Dimensions

Size: 0.5″ × 0.6″ × 0.17″1
Weight: 0.7 g1

General specifications

 

Minimum operating voltage: 2 V2
Maximum operating voltage: 16 V
Maximum output current: 1.5 A3
Output voltage: 3.3 V4
Reverse voltage protection?: N
Maximum quiescent current: 1 mA5

 

כתוב בקורת
שם פרטי


ביקורת : הערה ללא תרגום מ HTML!

דירוג רע            טוב

הכנס את הקוד התיבה

3.3V Step-Up/Step-Down Voltage Regulator S9V11F3S5
לחץ להגדיל
3.3V Step-Up/Step-Down Voltage Regulator S9V11F3S5
לחץ להגדיל
3.3V Step-Up/Step-Down Voltage Regulator S9V11F3S5
לחץ להגדיל
3.3V Step-Up/Step-Down Voltage Regulator S9V11F3S5
לחץ להגדיל
3.3V Step-Up/Step-Down Voltage Regulator S9V11F3S5
לחץ להגדיל