סל הקניות
0 פריטים
 
             קטגוריות
 

3-AXIS TB6560 CNC STEP MOTOR DRIVER

3-AXIS TB6560 CNC STEP MOTOR DRIVER
לחץ להגדיל
מחיר ₪570
זמינות המוצר במלאי
דגם 3A-TB6560
דירוג ממוצע ללא דירוג

Share |


כמות הוסף לסל

3-AXIS TB6560 CNC STEP MOTOR DRIVER


  • HUGE improvements from TA8435 based boards
  • Resolution: Full step, 1/2, 1/8,1/16 selectable via switch for each axis.
  • Absolute maximum ratings: 40VDC @ 3.5 amps(peak)/phase motor output per axis *
  • PC parallel port DB25 connector has being installed onboard.
  • Adjustable motor current at 100%, 75%, 50%, 20% of full current by on-board switch
  • Supports different 4 Wire, 6 Wire and 8 Wire stepper motors for 3 axis drive.
  • Built-in overheat protection circuit in TB6560
  • This board is tested through KCAM, Mach 2/3, touborCNC CNC software.
  • This board has been used in different design 3D engrave machines, millers, routers.
  • Include manual control circuit to test all 3 axis step motors manually
  • Step Current(r) extension board (Optional: See my other auctions):
    Step Current technology is used to decrease the current upto 1/2, when motors are in idle for all axis so as to protect expensive step motor and driver board for long time running.

 

  See TB6560 Datasheet by TOSHIBA.
The full current is preset at 2.5A by resisters for this board you can adjust it by changing them.

Comparison between TA7835  and TB6560 (used in V2.0 CNC driver board):

  V 1.0 (TA7835) V 2.0 (TB6560)
IC Overheat protection N/A Built-in
Current Adjustable 100%/50% 100%/75%/50%/20%
Current for motor Peak 2.5A Peak 3.5A [*]
Voltage for motor Max 35V Max 40V [*]
Micro stepping 1 1/8 1 1/16
Frequency (fOSC) Max 80kh Max 600khz
  /td> /td>

 

 

כולל:

 

  • one 3 axis CNC driver board
     

תיעוד

כתוב בקורת
שם פרטי


ביקורת : הערה ללא תרגום מ HTML!

דירוג רע            טוב

הכנס את הקוד התיבה

3-AXIS TB6560 CNC STEP MOTOR DRIVER
לחץ להגדיל
3-AXIS TB6560 CNC STEP MOTOR DRIVER
לחץ להגדיל